Результаты поиска

Great, it worked, thanks! The problem was, I changed the date of the PC to check something, and it messed up everything probably with the license, when I turned it back, it worked again.

1.Installation worked perfectly 2.When I run ZP, I can see it start in the "task manager" and then disappear. the last thing I see is the message "updating license" then ZP just won't start and the instance in "task manager" will dissapear.

Hi, I'm using ver 5.0.1.0 because it's very stable for me and without any problematic errors. I've been using it for several months without a problem, but today the program stopped and isn't opening anymore. I used uninstall and then downloaded the same version from the website and installed...

Listen, I didn't mean to offend anyone guys, it's all cool.. I just asked for a creative solution if anyone could help me. It's ok, I figured out a way to solve it myself.. Thanks anyways.

Thanks for the suggesstion but look man, The situation I'm handling is this - I don't have power problems often, and the PC's backup battery is great since it gives the PC additional 5 min, like a small UPS. The PC's backup turns the computer off once it notices that there was a power faliure...

Hey lokiys, Before it is suggested as an enhancement, Are you sure there isn't any way to do it? I'll ask a different question, do you know of a way to safely exit ZP(not causing problem due to sudden closing it), that will not cause the question to pop up? I tried doing it with task manager...

Any admin can help? Hungry Bulldozer?

lol, I haven't tried to offense someone, nor would I think about shutting down ZP since I'm using it on a daily basis, so realx. If the title offends any moderator, feel free to change it(I can't do it with my privileges), I just want to find a solution to my problem. Your answer wasn't even...

Hi, Whenever I have electricity problems, My computer's backup battery starts working and initiates a normal computer shut down. But I have a problem that ZP causes. When the PC tries to shutdown, ZP asks whether I'd like to continue the running of the templates when I activate it again. This...

Thanks! what impact does it have if I switch from private proxies to socks proxies? By the way, I've just tested and the result was ~1000 connections, does it mean that I can use 1k threads maximum, or it indicates something else?

Thanks for the detailed reply, Regarding router, I probably forgot to write this, but along with a great computer I bought a great router(ASUS RT-N66U N900 ) that can run up to above 30k threads http://www.smallnetbuilder.com/lanwan/router-charts/bar/77-max-simul-conn So that's not the issue...

Hi, I've noticed that there are some websites that I'm using, that prevent from signing up whenever I'm using private proxies. But seem to work perfect when I'm not using proxies. Is there a way to overcome this situation and cause the websites to think that I'm not using proxies? Thanks.

Any update about this problem?

oh, yeah I thought you tried other ways. From what I tested yesterday, it doesn't help that much.. just like you said.. :\

k, thanks for the update man. What are you currently doing to overcome this man?

What's up? is there any update about this? I don't get what is the point of having a good PC and internet connection with a Pro license of ZP without the ability to scale up your campaigns and use much more threads. It is impossible to continue working with the tool since you just can't scale...

Thanks man for the help. Using 1 thread per base is a great temporary idea, I think since it will not have a connection between 2 different templates but will take way more time to load each base. However, after a while(if the templates aren't simple templates to be executed in less than 2 min)...

Wow man, seeing someone with the same problem as my really helps! I saw your other threads with the screenshots, and thats EXACTLY what happens to me. I've got more that 100 projects, and now that I'm trying to scale it up I really got no clue what to do. How do you overcome this problem man? do...

Hi, I have a problem whenever I'm trying to multithread above ~30 with ZP. I have 100 private proxies, 32GB ram, core i7 and 100mb/s internet speed. With other programs, like SB, whenever I increase the amount of proxies and then the amount of threads, the success rate stays the same. When I'm...

But if I'm Editing a template in PM and ZP is open but not running anything, I'm editing the template and then saving it but while not closing PM, I'm running the template in ZP. Will it run the updated version of the template or I need to exit and re-open ZP?

I know that ZP knows how to work with the same list and sync it between the many threads it uses to always keep an updated list in every thread. But I want to know, If I'm running a template in several threads in ZP, if I use PM with the same template, will it interrupt it or ZP will...

Thanks

Hi, Is there any forecast about if and/or when the action "Wait for element" will be added? Thanks!

Found it, whenever I'm using multi threading and using this C# code for pasting, the templates probably can't copy and paste one by one so it gets stuck, this is the code, I remember HB gave it to me once, but only now I noticed that I'm having problems with it, I'll try to find other solutions.

NVM, I just saw that it is possible via the .bat I'll test it and see, thanks!

The instance stops responding only in ZP, I will try to test it and see which actions might cause it to happen and in which stage the template gets stuck

Hey, I just tested it, but it doesn't work if for some reason the template is stuck on some page..I tried using "tab timeout" but it didn't work either.. Do you know of a solution to prevent templates from getting stuck/if they get stuck- stop the template...? Thanks!

Thanks

Check maximum success, it might limit the template..

Is there a way to have a timeout for a template, example, if the template didn't succeed/fail within 500 sec, finish the template as failure? Thanks.

Thanks!

Is it possible to add a sort of a timeout to a template? For example, If the template wasn't executed within 10 min, finish it?

Hi, is it possible to add an option to Interrupt/Stop/Start all templates within the .bat creator? sometimes when I'm running a schedule several templates are stuck on a website and become endless, thus I want to have an action to interrupt and stop all of them. Thanks!

Thanks for the update!

Hi, Is it possible to add in future versions the ability to copy blocks of actions from template to template, like this one: Instead of having to copy each one and then to re order them.. It would really help and ease the process of adjusting many templates at once.

The execution time wasn't the problem, the problem was that the threads aren't starting fast enough and instead of having a total amount of >100 threads I'm averaging on 30 even though I used 5 loops in each templates and my PC's ram and CPU levels didn't even get to 40%. I'll try with more...

Thanks

For example, if I'm having 4 templates that finish in about 30 sec-1 min each. and the max amount of threads is 200, while I'm trying to get more than 1000 successful executions for each templates, instead of running on constant 40+ threads on each template, they run on 3-4 each which takes much...

As I've seen on ZP4 and even bigger notice on ZP5, if I'm not changing anything and there are still 5 threads per process, it takes a lot of time for the program to start new threads every time. Is there a way to make the program create threads faster? RAM and CPU are the best, so there is no...

Anyone?

Happens to me too, IDK if it's because of ZP5 or not..

was it always like that or only in the last versions? Does changing the threads per process can affect something? Edit: As I use ZP5 I see that it is much slower than ZP4, for example, it takes much longer time to load the program itself and execute stuff like "Interrupt" that takes way longer...

threads in 1 process? 5 What happens if I increase/decrease it? which one makes the loading of mass templates faster?

Depends, Could take between 30 sec to 3 min.. Is there any way to launch the templates much faster? I feel as if in ZP5 the normal templates that I used in ZP4 are launched slower..

Hi, I have several templates that I want to run, each with max 100 threads. Maximum amount of overall threads is 100 as well, but when I'm running the templates, the thread count is extremely low for each template and don't go over 10, almost as if it takes years for ZP to restart the thread...

Up.

This happens while I'm running ZP with over 130 threads. My PC has 32gb ram & Core i7, and it doesn't reach the maximum, as I check the CPU Usage, but ZP can't handle the amount of threads for some reason and just causes this to happen:

Thanks Man

Hi, Can you please add the ability to change the settings of a template, by changing the "Success Count" and "Maximum threshold count for consecutive failures" in the bat file compiler? ("Create .bat file") It would be really great, Thanks.

Win 7, Thanks.